How to effectively improve the utilization rate of industrial pumps? High pressure oil pump manufacturers tell you

How to effectively improve the utilization rate of industrial pumps?

The technical analysis of industrial pump is carried out.

In view of the development and application of energy saving technology for the products such as pumps for petrochemical industry and condensate water recovery device of steam system, the key technologies such as high-efficiency hydraulic model and overall structure energy saving optimization design are studied. The high-efficiency and overload free hydraulic models such as centrifugal pump, mixed flow pump and tubular pump are studied, and the key manufacturing technology, wear-resistant material formula and sealing technology are solved The energy saving key technologies of steam valve condensate water recovery unit were overcome. The average efficiency of bottom pump, desulfurization pump and large-scale tubular pump of oil refining unit was developed, which was more than 5% higher than that of similar domestic products. The recovery rate of condensate is 95% in the high efficiency recovery device of condensate from steam system drain valve.

How to improve the efficiency of industrial water pump effectively.

The ultra-high pressure oil pump, which is developed by this technology, has been successfully applied to petrochemical, coal chemical, power station and east line of South to North Water Diversion Project. The practice shows that the research of the high pressure fuel pump is of great significance to improve the utilization of heat energy of steam system, promote the promotion and renewal of energy-saving products and technologies of steam network system in China, and improve the heat recovery and utilization of steam system.

Improve the nozzle of high pressure pump.

It is helpful to improve the efficiency of the high-pressure pump after reasonable improvement.

Shorten the length of the pipe wall.

For the pipe wall which is not needed to be used, it can be reduced appropriately. If the pipeline is too long, the air flow will be affected. Removing the redundant pipe wall can improve the working efficiency of the high-pressure pump.

The high pressure pump can work for a long time, because the flow it delivers is proportional to the speed. With the help of governor, the equipment can automatically adjust the quantity of materials delivered. Therefore, the high-pressure pump can also transport the materials in the positive and negative medium, so as to ensure the long-term and efficient operation of the high-pressure pump.