Stainless steel and carbon Reinforced PEEK materials have been used to manufacture high quality pumps, which make the pumps have various superior performances in high pressure liquid applications. The high pressure pump with 95% high volume ratio can reduce energy consumption and reduce CO2 emission. As we all know, the advantages of high pressure pump are small pulsation, long life and compact structure. High voltage pump is famous for its characteristics of small pulse, long life and compact structure. Water lubricates the moving parts themselves.
The ultra-high pressure piston pump is small in volume, light in weight and durable in material, which makes the axial piston pump work flexibly in any environment. Because of the low cost of operation and maintenance, the total cost of high-pressure pump is lower than that of other high-pressure pumps on the market.
The high voltage pump has few parts, less maintenance times, stable and reliable operation. This means that the average operating time of the pump is not less than 8000 hours. Small size, light weight, durable material, make this pump in almost any environment very flexible. The total cost of high pressure pump is lower than any pump on the market due to low energy consumption, operation and maintenance costs.
When the high voltage pump is running, it is necessary to check whether the water level of the reducer oil tank, high-voltage pump oil level and emulsion tank is within the specified oil level and water level. Confirm the sensitivity of safety valve, pressure gauge, electric contact pressure gauge, water level gauge and liquid level indicator is correct. Pressure gauges and safety valves are checked every year. Safety valves should be inspected regularly to prevent sticking of valve core and clogging of valve bore.
Small high pressure plunger pump shall check all components, valves, solenoid valves, pipes, etc. Check whether the electrical Zero (ground) line is firm and reliable, and there is no leakage, air leakage and oil leakage. Stop the pump body for more than one week, check whether the insulation of main motor is good and whether the contact signal with hydraulic press is correct and reliable.